what setting to put cameo on to cut printer paper

This post may comprise chapter links. If you lot purchase something through the link, I may receive a pocket-size commission at no actress accuse to you.

Jump to Tutorial

Learn all the tips and tricks to cutting paper with a Silhouette Machine. Nosotros'll show you what cutting mats to utilise, what blade works all-time, how to remove the paper from the cutting mat without ripping it and more!

Moving forth in the Learn Your Silhouette series…allow's talk about paper.

Cutting newspaper tin can exist tricky if you utilize the wrong materials and tools. And I was the person who avoided cutting paper for years because I was (unknowingly) using the wrong tools to practice it.

I would get and then frustrated and angry because I wasted my fourth dimension and materials.

Back when I first started using my Silhouette machine there weren't things like separate cutting mats for paper crafts.

I learned pretty quickly that a make new mat would swallow your newspaper if you lot didn't endeavor to "de-stick" information technology beforehand.

I as well learned that you couldn't utilise the aforementioned blade for glitter newspaper/vinyl that you would use for regular cardstock. Glitter dulls your blade and that causes problems for other projects you effort to do!

Now nosotros have and so many different tools to use specifically for paper that makes it easier to craft with paper.

Tools you need to cutting paper with a Silhouette machine

You lot will demand….

• Lite grip cutting mat – this mat comes less sticky than a regular or strong grip mat which makes it perfect for paper! There's no extra stride to de-stick you mat required.
• Autoblade – buy an extra autoblade and brand sure you lot simply employ it for newspaper ! Paper will dull your blade faster so if yous're using the same bract for paper and vinyl (or another material) then you may find that your blade isn't cutting all the mode through your material. Label your blade so that yous know which one is for newspaper! Just make sure the autoblade is made for your specific auto!
• Scraper tool – you need this to become all the actress paper off your cutting mat. You want your mat to exist completely make clean earlier y'all put a new piece of paper on it!

TIPS FOR CUTTING Newspaper USING A SILHOUETTE Motorcar:

What cut settings should you use to cut paper?

To cut cardstock your settings should be….

• Bract: 4
• SPEED: 4-viii (employ a slower speed for more intricate/detailed designs)
• Force: 24
• PASSES: 1
• OVERCUT: I like using this considering it helps you lot become cleaner cuts. Starting time at 0.1mm for well-baked corners

Ever practice a test cut before cutting your blueprint to make sure the blade tin cut through your paper. If it doesn't, adjust your settings and try again.

Depending on the texture of the cardstock you may need a college blade depth (normally five is a adept place to start with textured cardstock).

What is line segment overcut and why you should utilize it to cutting paper?

In Silhouette Studio, overcut is divers as cutting your pattern a footling outside of the lines.

Why is this benign?

Typically if your blade drags around an edge it can potentially rip upwardly the border and tear the newspaper. Overcut prevents this past cutting past the corner, lifting the blade upwardly, and then volition starting time cutting the next side. Cutting corners this fashion will keep the blade from rotating and potentially violent your corners.

OVERCUT WILL NOT WORK ON ROUNDED EDGES. It cannot discover them. Only plough information technology on if you're cutting a pattern with sharp corners.

You can turn Overcut on in the SEND tab in your Silhouette Silhouette. You can suit the width of the overcut depending on what you like, but I always like to start small-scale (0.ane is what I recommend) and then become bigger if I need to.

Yous can find a ton of fun paper cut files on SoFontsy! Digital Gems has so many designs to choose from for your adjacent project.

Do you need to clean your mat to cut paper?

If you have used this mat for other paper projects…Aye.

If you have small scraps of leftover paper on your mat employ your scraper tool to get them off.

This is a pace y'all should not skip because any bits of paper still stuck on the mat will cause your newspaper to not lay flat and it volition end your blade from getting a clean cutting.

If y'all accept a brand new calorie-free grip mat, nil needs to be done.

However, if all y'all have is a new standard grip or strong grip mat you must de-stick you mat! To practice this, use a cotton fiber t-shirt and dab at the mat until it loses a expert portion of its stickiness.

I was using a strong grip mat for this project because information technology has been used and then many times for other things that information technology has lost some of its stick.

I as well couldn't notice my light grip mat so…..I used what I had.

Iv things you MUST do earlier hitting cut!

1. Cheque to make sure your rollers are locked in place. I can't tell you how many times I've been in the eye of a cut just to accept my roller slip and completely ruin my material.
2. Double and triple check your cut settings to make certain they're right.
3. Check your bract to make sure it's clean. If it'southward not, clean it out thoroughly before inserting it dorsum into the holder.
4. Practise a test cut that mode you know whether or not your bract depth works for the blazon of material you're cutting.

Before unloading your mat afterward your cut is finished, check the cut lines!

Check to make sure your design is cut all the mode through.

To do this you can lift up a corner of the newspaper to come across if it the weeded pieces are fully detached. You tin also smoothen a light (your phone flashlight works well for this!) on the paper and check that your unabridged design is cut.

If you observe your design isn't fully cut clean out your bract and then press SEND to cut your design again.

Other posts from the Larn Your Silhouette Series:

• How to Use Transfer Tape
• How to Cut and Weed Modest Vinyl Designs
• How to Go Crisp Paint Lines with Stencil Vinyl
• How to Use Heat Transfer Vinyl on Shirts
• How to Remove Heat Transfer Vinyl if Yous Mess Up

Instructions

How to prep your machine and software before you hit cutting

1. Prep your mat. If your mat has pieces of paper on it from previous cuts, make clean them off with your scraper tool.
2. Load your paper on the mat and into your auto.
3. Check your bract to make certain at that place are no small-scale pieces of paper or other materials inside of it. Make clean information technology out if you need to.
4. Double check your cut settings in Silhouette Studio and make certain OVERCUT IS TURNED ON.
5. Practice a test cutting to make sure your blade will cut through the newspaper. If it does non plough your blade depth upwards to 5 and try again. Go along to exercise this until yous have the correct settings for your auto.

What to practise subsequently your design is finished cutting

1. Practice Non UNLOAD YOUR MAT YET!
2. Check to brand sure your entire pattern cut on your paper. I like to use my jail cell phone flashlight to check.
3. If your machine did not cutting your entire design, Hit SEND in the Silhouette software over again and recut it.
4. Gently pull up the paper to brand certain that your pattern comes upwardly easily. If information technology does, hitting UNLOAD.
5. You may need to use a weeding tool to get all the small-scale pieces weeded. Most of the big pieces should merely fall right out!

Notes

Settings to cut paper with your Silhouette machine

• BLADE: 4
• FORCE: 24
• PASSES: one
• SPEED: iv
• OVERCUT: On
  

jordansubjectence.blogspot.com

Source: https://simplymadefun.com/how-to-cut-paper-with-a-silhouette-machine

Share this post